Description
4 Pt Ratchet Suspension CSA Version Ridgeline Cap Style Hard Hat | Case of 16 | Pyramex
- That's only $13.48 per hard hat.
- ABS material.
- Low profile design.
- Rear padded suspension.
- 4-position harness points.
- Replaceable sweat band.
- Vented pressure pad.
- Universal accessory slots.
- Passes reverse orientation.
- Passes high temperature.
- Passes low temperature.
- Easy to grasp knob and adjusts the suspension from 6 1/2 to 8.
- Swinging hinge points.
- Custom imprinting available.
- Weight: 358 gm
- Shell thickness: 2 - 4 mm
- Dimensions: 28 cm x 22 cm x 15.2 cm
- Suspension adjust sizing: 6.5 - 8
- Suspensions: 4-point & 6-point ratchet
- Styles: vented & non-vented
- Standards: ANSI/ISEA Z89.1-2014 and Cert. Mod. - CAN/CSA Z94.1-15
- Types: Type 1
- Classes: non-vented Class E, G, and C | vented Class C
- Optional features: reverse donning, hi-vis colors (HV), lower temperature(LT),
- higher temperature (HT)
- Shell: high impact acrylonitrile-butadiene-styrene (ABS)
- Suspension: high density polyethylene (HDPE) & high impact nylon
- Sweat band: polyester fabric & polyurethane (PU) foam
- Types: Type 1 offers protection to the top of the head
- Classes: Class E (electrical) rated for 20,000 volts | Class G (general) rated for 2,200 volts | Class C (conductive) does not offer electrical protection
- Tested and marked for reverse orientation
- HV: meets all requirements for high visibility
- LT: provides protection at low temperatures -22 degree F
- HT: provides protection at high temperatures 140 degree F
- Date code: indicates month and year when the shell was molded - does not indicate service life
- Maximum service life of 5 years (shell) & 1 year (suspension) from the time of first use
- Never alter or modify the shell or suspension system
- Inspect the hard hat each time before use and replace if there is ANY sign of damage
- Replace hard hat after it receives a considerable impact
- Accessories such as liners have not been tested to the requirement of this standard
- Clean only with mild soap and lukewarm water
- Store hard hat in a clean, dry place that is out of direct sunlight
- Do not use paints, chemicals, adhesives, gasoline or similar substances on the hard hat
- Labels are acceptable if they do not affect a hard hatÂ’s protective rating or make it difficult to find damage
- ANSI/ISEA Z89.1-2014 (R2019 - Hard Hats)
- CAN/CSA Z94.1-2020
