Description
Ridgeline Vented Full Brim 4 Pt Ratchet Suspension Hard Hat | Case of 12 | Pyramex
- That's only $19.08 per hard hat.
- ABS material.
- Low profile design.
- Rear padded suspension.
- 4- position harness points.
- Replaceable sweat band.
- Vented pressure pad.
- Universal accessory slots.
- Passes high temperature.
- Passes low temperature.
- Easy to grasp knob and adjusts the suspension from 6 1/2 to 8.
- Swinging hinge points.
- Vented have universal accessory slots
- Vented meet Class C.
- Custom imprinting available.
- Weight: 378 gm
- Shell thickness: 1.7 - 4 mm
- Dimensions: 31 cm x 27 cm x 15.2 cm
- Suspension adjust sizing: 6.5 - 8
- Suspensions: 4-point suspension may be converted to 6-point suspension with optional strap
- Standards: ANSI/ISEA Z89.1-2014 and Cert. Mod. - CAN/CSA Z94.1-15
- Types: Type 1
- Classes: Class E, G, and C (Vented: Class C only)
- Optional features: hi-vis colors (HV), lower temperature(LT), higher temperature (HT)
- Shell: high impact acrylonitrile-butadiene-styrene (ABS)
- Suspension: high density polyethylene (HDPE) & high impact nylon
- Sweat band: polyester fabric & polyurethane (PU) foam
- Types: Type 1 offers protection to the top of the head
- Classes: Class E (electrical) rated for 20,000 volts | Class G (general) rated for 2,200 volts | Class C (conductive) does not offer electrical protection
- HV: meets all requirements for high visibility
- LT: provides protection at low temperatures -22 degree F
- HT: provides protection at high temperatures 140 degree F
- Date code: indicates month and year when the shell was molded - does not indicate service life
- Maximum service life of 5 years (shell) & 1 year (suspension) from the time of first use
- Never alter or modify the shell or suspension system
- Inspect the hard hat each time before use and replace if there is ANY sign of damage
- Replace hard hat after it receives a considerable impact
- Accessories such as liners have not been tested to the requirement of this standard
- Clean only with mild soap and lukewarm water
- Store hard hat in a clean, dry place that is out of direct sunlight
- Do not use paints, chemicals, adhesives, gasoline or similar substances on the hard hat
- Labels are acceptable if they do not affect a hard hats protective rating or make it difficult to find damage
- ANSI/ISEA Z89.1-2014 (R2019 - Hard Hats)
- CAN/CSA Z94.1-2020
